English
中文简体
Español
● 3000W Pure Sine Wave Inverter
● Automatic Transfer Switch
● 100A High-speed battery charger
● 50A MPPT solar charge controller
● 50A bi-directional DCDC charger
● Full System Monitoring via a remote touch display screen
| 3000W All-In-One | ||||
| SPECIFICATIONS | 12V model | 24V model | 12V model | 24V model |
| 120V model | 230V model | |||
| Bi-directional Inverter Charger | ||||
| Inverter | ||||
| AC Output Power(Continuous) | 3000W | |||
| AC Surge Power (Peak) | 6000W | |||
| AC Output Voltage/Frequency | 120 VAC / 60 Hz | 230 VAC / 50 Hz | ||
| AC Output Current | 25A max | 13A max | ||
| AC Output Waveform(THD) | True Sinewave (<5% THD) | |||
| Nominal DC Input Voltage | 12.5 VDC | 25 VDC | 12.5 VDC | 25 VDC |
| DC Input Voltage operating range | 10.5 – 16.5 VDC | 21 – 33 VDC | 10.5 – 16.5 VDC | 21 – 33 VDC |
| Efficiency | 90% typical | 90% typical | ||
| Battery Charger | ||||
| Charger input operating range (full power) | 95-135Vac (105-130Vac) | 190-270 Vac (210-260Vac) | ||
| Charging Voltage Range | 13.8 - 14.8V (Selectable) | 27.6-29.6V (Selectable) |
13.8 - 14.8V (Selectable) | 27.6-29.6V (Selectable) |
| Float Voltage Range | 13.0 - 14.0V (Selectable) | 27.0 - 28.0V (Selectable) | 13.0 - 14.0V (Selectable) | 27.0 - 28.0V (Selectable) |
| Charger Current (max) | 100A | 50A | 100A | 50A |
| Charger Current Setting | 25-100A | 10-50A | 25-100A | 10-50A |
| Battery Type | Gel, Flooded, AGM, Lithium, Programmable | |||
| Charge Control | Bulk / Absorption / Float / Recharge | |||
| Recharge Voltage Range | 12.0 - 13.6 V (Selectable) | |||
| Recharge Timer | 7 days (automatic) | |||
| Efficiency | 90% typical | 91% typical | ||
| AC Transfer Switch | ||||
| Nominal AC transfer time – utility to inverter | <30ms (delayed as required by voltage decay of active load) | |||
| Nominal AC transfer time – inverter to utility | <20ms | |||
| Transfer Relay Rating | 30A | 16A | ||
| AC Input Source Setting | 15, 20, 30A | 4,6,8,10, 13, 16A | ||
| AC Output Port 1 (AC Socket) | NEMA 5-20 GFCI (Optional) | EU: CEE 7/4 (16A) | ||
| UK: BS1363 (13A) | ||||
| AU: AS/NZS 3112 (10A) | ||||
| AC Output Port 2 (Hard Wire Connector) | 30A max | 16A max | ||
| Bi-directional DC TO DC Charger | ||||
| DC Input Range | ||||
| Engine Battery Voltage Range | 10.5V-15.5V | 21.0V-31.0V | 10.5V-15.5V | 21.0V-31.0V |
| Charger Current (max) | 50A | 30A | 50A | 30A |
| Reverse Charging( Max) | 30A | 20A | 30A | 20A |
| Charger Current Setting | 10-50A | 5-30A | 10-50A | 5-30A |
| Reverse Charger Current Setting | 10-30A | 5-20A | 10-30A | 5-20A |
| Charging Voltage Range | 13.8 - 14.8V (Selectable) | 27.6-29.6V (Selectable) |
13.8 - 14.8V (Selectable) | 27.6-29.6V (Selectable) |
| Float Voltage Range | 13.0 - 14.0V (Selectable) | 27.0 - 28.0V (Selectable) | 13.0 - 14.0V (Selectable) | 27.0 - 28.0V (Selectable) |
| Battery Type | Gel, Flooded, AGM, Lithium, | |||
| Charge Control | Bulk / Absorption / Float / Recharge | |||
| DC Solar Range | ||||
| Solar Input Voltage Range | 15.5-120V | 30-120V | 15.5-120V | 30-120V |
| Solar Input Current(Max) | 50A | 30A | 50A | 30A |
| Solar Charger Current(Max) | 50A | 30A | 50A | 30A |
| Charger Current Setting | 10-50A | 5-30A | 10-50A | 5-30A |
| Charging Voltage Range | 13.8 - 14.8V (Selectable) | 27.6-29.6V (Selectable) |
13.8 - 14.8V (Selectable) | 27.6-29.6V (Selectable) |
| Float Voltage Range | 13.0 - 14.0V (Selectable) | 27.0 - 28.0V (Selectable) | 13.0 - 14.0V (Selectable) | 27.0 - 28.0V (Selectable) |
| Battery Type | Gel, Flooded, AGM, Lithium | |||
| Charge Control | Bulk / Absorption / Float / Recharge | |||
| Display (Main Unit) | ||||
| Power On/OFF Switch | Yes (Push Button) | |||
| Indicator | 4 LEDs (Power, AC Output, Unit Status, DC/SOLAR Status) | |||
| CANBUS Control | By CANBUS | |||
| Remote Panel | By Remote | |||
| Ignition Start Port | For use with Vehicle ‘ACC’ signal | |||
| USB Port | Unit software upgrade | |||
| Remote Display Panel (External) | ||||
| Power On/OFF Switch | Yes (Push Button) | |||
| Display Type | LCD with backlighting | |||
| Numerical Display Function | Battery Voltage, AC Power, DC Current | |||
| Graphics Display Function | AC Bypass, Battery Power, AC Input, Battery Status, DC SOLAR Status Warning/Fault Code |
|||
| Safety and Environmental | ||||
| Approval | cETLus | CE | ||
| Safety | UL 458, CSA C22.2 No. 107.2-01 |
EN62477-1, AS/NZS 4763, AS/NZS 60335.1, AS/NZS 60335.2.29 |
||
| EMC | FCC Part 15 Class B | EN61000-6-1, EN61000-6-3, EN61000-3-2, EN61000-3-3 |
||
| Operating Temperature | 0°C to 50°C | |||
| Storage Temperature | -20°C to 60°C (-4°F to 140°F) | |||
| Relative Humidity | 5-90% noncondensing | |||
| Operating Altitude | Up to 9,843ft (3000m) above sea level | |||
| Weights and Dimensions | ||||
| Weights | 10.8kg | |||
| Dimensions L X W X H | 405mm X 305mm X 120mm | |||
